Are you looking for an easy DIY project? Build your own rustic bar stool!
4 pieces of 2×2 timber – 74 cm long
They will be used for the legs
8 pieces of 1×4 timber – 25 cm long
They will be used for the supports
4 pieces of 1×4 – 35 cm long
They will be used for the seat
Circular saw (you can use 1200W CIRCULAR SAW : https://www.worx.com/en_GB/saws/1200w-circular-saw.html)
Sander (you can use 270 W 1/3 SHEET FINISHING SANDER : https://www.worx.com/en_GB/270-w-1-3-sheet-finishing-sander.html)
Electric drill (you can use 20V MAX LITHIUM-ION BRUSHLESS IMPACT DRILL : https://www.worx.com/en_GB/20v-max-lithium-ion-brushless-impact-drill-3.html)
Build the sides
Cut the components out of 2×2 timber. Drill the holes at both ends of the supports and secure them to the legs with screws. Glue the joints. Make sure that the corners are square. Proceed the same way for the opposite side.