Are you looking for an easy DIY project? Build your own rustic bar stool!
Whether it’s located in the kitchen or in the backyard, a home bar can be a place to rest and relax, during a party but also in everyday life.
Here’s a simple DIY project that will help you to create your own rustic bar stool in a few easy steps.
Rather than buy it, make it!
MATERIALS
4 pieces of 2×2 timber – 74 cm long
They will be used for the legs
8 pieces of 1×4 timber – 25 cm long
They will be used for the supports
4 pieces of 1×4 – 35 cm long
They will be used for the seat
FACILITIES
Measuring tape
Hammer
Framing square
Level
Wood glue
Screws
TOOLS
Circular saw (you can use 1200W CIRCULAR SAW : https://www.worx.com/en_GB/saws/1200w-circular-saw.html)
Sander (you can use 270 W 1/3 SHEET FINISHING SANDER : https://www.worx.com/en_GB/270-w-1-3-sheet-finishing-sander.html)
Electric drill (you can use 20V MAX LITHIUM-ION BRUSHLESS IMPACT DRILL : https://www.worx.com/en_GB/20v-max-lithium-ion-brushless-impact-drill-3.html)
STEP 1.
Build the sides
Cut the components out of 2×2 timber. Drill the holes at both ends of the supports and secure them to the legs with screws. Glue the joints. Make sure that the corners are square. Proceed the same way for the opposite side.
STEP 2.
Put together the frame
Lock the two sides of the bar stool together, as displayed in the picture.
Drill the holes at both ends of the supports and screw them to the legs.
STEP 3.
Build the seat
Cut four wooden pieces at 35 cm and secure them together with screws.
Drill a hole through the frames, as shown in the picture.
Use the glue to vise the joints together until dry and then screw them.
STEP 4.
Attach the seat to the whole structure
Centre the frame of the bar stool to the seat. Drill the holes through the frame and screw them to the seat. Use the glue to secure them together and flatten the bar stool’s surface.
STEP 5.
STEP 5.
Enjoy your bar stool!
Now, your bar stool is ready. Unleash your creativity to decorate it and…let the part begin!
